Home Page Company Profile Product Display Inventory Introduction Quality System Contact Us Our Advantage 简体中文
 
Products Guide:
·Leading Products·
·Export Products and Standards·

Titanium Materials:
·Titanium Plate·
·Titanium Pipe·
·Titanium Wire·
·Titanium Bar·
·Titanium Target:·  
·Titanium Foil & Titanium Belt·
·Titanium Alloy Plates·
·Titanium Alloy Bars·
·Pipe Fittings of Titanium Alloy·

Titanium Products:
·Titanium Standard Components·
·Pipe Fittings and Odd-form Components of Titanium Alloy·
·Titanium Arts and Crafts·
·Titanium Alloy Standard Components·
·Pipe Fittings and Odd-form Components of Titanium Alloy·  
·Titanium Arts and Crafts·  

Titanium Equipment:
·Titanium Baskets and Titanium Coil Pipes·
·Reaction Kettle and Heat Exchanger·



Contact Information:
Add.: No. 67, Daqing Road, Baoji City, Eastern CLASS A, 26th Floor, 2601 Building, Room
Tel.: +86-917-3412107 3414107
Address: Middle Road, Baoji Titanium Po(Factory site
Tel.:+86-0917-3388318
Factory site

Headquarter Tel.: +86-917-3388318

Mobile Phone: 13992728986

Production department:13319171803
Fax:+86-0917-3414107
Contact Person: Mr. Zhang
MSN:bjddti@Hotmail.com
Email:www@bjddt.com

Online Customer Service:
点击这里给我发消息




Call me!
Links:

贸易通在线洽谈
 
   Product Display:
 
 
GR1 GR2 GR5 Titanium Plate for Export Executing AMS4911 AMS4928 AMS4902
 
Titanium Ball Valve Exporting to the U.S.
 
TC4 Pipe Bar Exporting to Korea
 
 
Titanium Wire for Export Executing ASTM B348 Material: GR1 GR5 Specification: Φ0.1-8MM
 
Standard Titanium Alloy Bar for Export such as ASM4928 ASTMB348 F136
 
Standard Components
 
 
Titanium Pipe for Export Material GR1 GR2 Executing American Standard ASTM B337 ASTM B338
 
Product Description:
Titanium Plate
Mode Manufacturing Process Delivery State Specification(Thickness ×Width ×Length) Executive Standard
TA1
TA2
TA9
Hot Rolling (4.1mm < Thickness<60mm) R M 0.3-0.5×400-600×1500
0.6-0.8×400-800×1200
0.9-6.0×400-1000×1000-3050
6.1-15×400-2000×1000-4000
16-60×400-2800×1000-5600
GB/T3621-94
AMS MIL JIS
Cold Rolling(0.3mm < Thickness<4.0mm) Y M
TA5
TC1
TC2
TA10
Hot Rolling (4.1mm < Thickness<60mm) R M
Cold Rolling(0.5mm < Thickness<4.0mm) R M
TA7
TC4
Hot Rolling (4.1mm < Thickness<60mm) R M
Cold Rolling(0.8mm < Thickness<4.0mm) Y M
Nickel Pipe
Mode Delivery State Diameter (mm) Process Executive Standard
N4
N6  
Y,M Φ5-110×1.0-4.5×2000-9000 (Weld-less cold rolling)
Larger than Φ110 ×1.0-8×1000-2000 (welding)
Cold rolling, drawing and welding

GB2882-81
AMS MIL JIS

Titanium Wire
Mode Delivery State Diameter (mm) Executive Standard
TA1,TA2 M 0.1-6.0 GB3623-96
AMS MIL JIS
TC4 Y 0.5-6.0
Titanium Belt Foil
Mode Delivery State Specification(Thickness × Width× Length/mm) Executive Standard
TA1,TA2 M 0.4-0.8×50-300×1000以上 GB3622-83
AMS MIL JIS
Y 0.025-0.3×50-300×500以上
Titanium Bar
Mode Manufacturing Process Delivery State Diameter (mm) Executive Standard
TA1
TA2
TA9
TA10
Hot Forging + Turning (Polishing) Smooth R M 6-200 GB2965-96
AMS MIL JIS
TC1
TC2
TC3
TC4等
Hot Forging + Turning (Polishing) Smooth R M 6-200

I Quotation Standard
1 GB 228 Metal Tensile Test Method2 GB/T 3620.1 Designation and Chemical Composition of Titanium and Titanium Alloys
2 GB/T 3620.2 Titanium and Titanium Alloys—Permissible Variations of Chemical Composition for Wrought Product Analysis
3 GB 4698  Chemical Analysis for Sponge Titanium, Titanium And Titanium Alloy

II Technical Requirements
1 Chemical composition of titanium and titanium alloy bars shall comply with specifications of GB/T 3620.1, when reviewed by the buyers, permissible variations of chemical composition shall comply with specifications of GB/T 3620.2
2 Diameters, side lengths and permissible variations of hot working bars shall comply with specifications of Table I
3 After hot working, diameters of turning (polishing) smooth bars and cold drawing bars shall comply with specifications of Table II
4 After hot working, the out-of-roundness of turning (polishing) smooth bars shall be no larger than half of their allowable size error
5 Random length of wrought-state bar is 300~6000mm, anneal-state bar is 300~2000mm, specified or multiple lengths shall be within the scope of random length. Permissible variation of specified length is +20mm; multiple lengths shall take the cutting length into consideration with each being 5mm. specified or multiple lengths shall be marked in contract

Table I
Diameter or Side Length

8~15

>15~20

>20~35

>35~50

>50~80

>80~125

>125~150

>150~200

Hot forging bar

±1.0

±1.5

±2.0

±2.5

±3.0

±3.5

±5.0

±6.5

Hot extruding bar

+0.8,-0.7

+0.8,-1.0

±2.0

±2.5

±2.5

----

-----

----

Hot rolling bar

+0.6,-0.5

+0.7,-0.5

+1.2,-0.5

+1.5,-1.0

+2.0,-1.0

+2.2,-1.2

------

-----


Sales network of titanium and titanium alloy-BAOJI DINGDING TI PRODUCTS CO., LTD. copyright by 2003